Surge Protection & Generator Installation in Gilbert, AZ
Monsoon lightning and power surges can damage AC units, pool equipment and electronics. We connect you with a licensed electrician to install whole-house surge protection and backup power.
Monsoon readyWhole-house surge protector being installed next to a residential electrical panel
What's included
- Whole-house (Type 1 or Type 2) surge protective devices at the panel
- Point-of-use surge protection advice for sensitive equipment
- Standby generator installation and automatic transfer switches
- Portable generator inlets and interlock kits
- Battery backup and solar-ready transfer equipment
- Permits and inspections where required
Signs you may need this service
- You've lost electronics or appliance boards after a storm
- Your AC, pool pump or EV charger has expensive control boards
- You work from home and need reliable power
- Someone in the home relies on medical equipment
- You want to protect fridges and freezers during outages
Do you need a whole-house surge protector in Arizona?
For most Gilbert homes, yes. Monsoon lightning and utility switching cause surges that can damage AC control boards, pool pumps, EV chargers and electronics. A whole-house surge protector at the panel is a low-cost layer of protection.
Installed whole-house surge protection typically costs about $300 to $800, depending on the device and panel. Pair it with plug-in surge strips for TVs and computers for the best protection.
What size generator does a Gilbert home need?
It depends on what you want to run. A portable generator with an interlock can power the fridge, lights and fans. Running central AC usually needs a larger standby generator, often 20 kW or more.
A licensed electrician can do a load calculation and recommend a portable inlet, a partial-home standby unit or a whole-home system. Standby generators also need a gas line and a properly rated transfer switch.
Generator transfer switches and interlocks
Never backfeed your home by plugging a generator into an outlet. It's dangerous for you and for utility crews. A transfer switch or panel interlock, installed by a licensed electrician, safely isolates your home from the grid.
How it works
Call 602-835-5455 or request service online. We'll connect you with an independent, Arizona ROC-licensed local contractor. They'll give you a free written quote before any work starts.
Other electrical services we connect you with
Electrical Panel Upgrades & Replacements
Replace an old or undersized panel with a modern, code-compliant breaker panel sized for AC, EV chargers and solar.
24/7 Emergency Electrician
Lost power, a burning smell or a sparking outlet? Call any time. We connect you to a licensed local electrician, 24 hours a day.
Electrical Repair & Troubleshooting
Tripping breakers, dead outlets, flickering lights and GFCI problems found and fixed by a licensed local electrician.
Frequently asked questions
How long does a whole-house surge protector last?
Many last years, but large surges can use up their protection. Most units have an indicator light that shows when they need replacing.
Can a generator run my AC in summer?
Yes, if it's sized correctly. Central AC needs a large standby generator or a soft-start kit on a suitably sized unit. An electrician will calculate the load.
Do I need a permit for a generator in Gilbert?
Standby generators and transfer switches usually need permits. Your contractor will confirm requirements with the Town of Gilbert.
Areas served across Gilbert & the East Valley
We connect you with independent, licensed electricians across Gilbert, the East Valley and nearby Pinal County communities.